Hacker Newsnew | past | comments | ask | show | jobs | submit | sambaumann's commentslogin

This reminds me of elevator saga (https://play.elevatorsaga.com/) - little programming game where you have to program elevator schedules.


This works if only 'trusted' actors have access to frontier class models that can search for vulnerabilities. With a near-frontier model available with open weights then attackers will be able to do plenty of damage even with 'fast remediation'


The CursorBench plot, for example, shows that fable does have slightly better performance, but Opus is pretty close, and is less expensive per task


In their video today, they said they asked Valve the original pricing, and they said (paraphrasing) "we can't tell you exactly - but the increase we recently had on the steam deck is about how much the pricing for machine increased" - which is how they came up with the $800 number


Depends on if the Valve employee meant percentage increase (+50%) or dollar increase (+$200).

That's set the steam machine at either $650 or $800, depending on which interpretation you're using.


Why would it be the same percentage increase? RAM is only one component of the whole machine. "We were going to sell our airplane for $10 million, but one screw doubled in price so now we're selling it for $20 million."


Because it's not just one screw, at the moment RAM, flash and GPUs are experiencing massive price increases.

And in both machines a similar percentage of their price is caused by these components.


>GPUs

AMD GPU's are all still basically MSRP. You can get a 9070 for $600 off amazon right now.


Because of the proportion of the two critical component increases as a part of the whole. It's not like a screw, more like the propeller or something. I just bought ram at retail price, and in my currency it went from $100 to $600CAD for 32Gb. I can't even justify a nvme drive at this point, the prices are comical.


I built my current computer in 2020, went from part-time junior engineer to full-time senior engineer, and I couldn't afford to replace that computer at the same specs today. It's unbelievable.

I couldn't afford to replace my current NVMe drives (which is why I'm very happy I set everything up with the Samsung 970 Pro, as they're 2-bit drives that will outlast even my grandchildren).

I actually had to RMA some RAM yesterday, and even that has gotten so expensive that it now costs more than my entire computer cost in 2020.


Ya that all sounds about right. Crazy times. Ironically, I followed a similar progression with slightly different variables. Maybe intermediate engineer in 2020—certainly not fresh anyway—but because of the volatility in the job market I couldn't bring myself to spend on a new PC then, so I built a piece of crap out of used parts I literally found on the street. Fast forward to now, finally stable and earning decently, decide to pull the trigger on these recent (modest) upgrades, and then bam, fired. At least I'll have a gaming rig to kill time for the next two years of unemployment lol



Ohh, I thought it was in their earlier videos. I did not see they released one today lol, my bad!


We did this once at a traditional hackathon - we took a food dehydrator and wired up a temp sensor and raspberry pi, wrote PID controls and turned it into a 3D printer filament dryer.


I bet somewhere in Shenzhen you can actually have a hardware hackaton with an infinite supply of components and a PCB fab around the corner.

They should organize this and show us how it is done :)


There's a big difference between a well considered high quality contribution made using AI as a tool and "claude find and fix an issue in this repo so I can put on my resume that I contributed to a high profile project". The problem is that it takes considerable time of the reviewers to filter out the high quality contributions vs the low quality ones.

I do think closing off contributions is a big step and would rather most projects find a middle ground, but it's definitely understandable why they did this.


This is what I do every time I want to read an article.


I still get "this model requires macOS" when trying to pull that one


I don't use Ollama myself anymore, but seems others been having similar issues for quite some time, maybe one of these fit your environment exactly? https://github.com/ollama/ollama/issues?q=is%3Aissue%20state...


I also do this, but I find the terminal ergonomics are a little awkward on mobile. I do think termius is the best version of it I've used though


Cool!

FYI the arrows on both photos only actually control the top photo.


Guidelines | FAQ | Lists | API | Security | Legal | Apply to YC | Contact

Search: